Mobile Machine Quickly Measures Manure Nitrogen - US - A prototype manure-analyzing device that works off a car or truck battery has been built by an Agricultural Research Service (ARS) scientist.

Chemist James Reeves analyzes manure for nitrogen in the field using a prototype near-infrared filter spectrometer.

Chemist James B. Reeves, at the ARS Environmental Management and Byproduct Utilization Laboratory in Beltsville, Md., designed the portable, easy-to-use analyzer so farmers can quickly tell how much nitrogen and water are in a sample of manure.

Many farmers apply manure to their crops as an organic fertilizer, but it can sometimes be too much of a good thing.

They apply too much because they’re not sure how much nitrogen or phosphorus might be in it and decide to err on the side of excess. But excess nutrients can run off in rainwater and eventually pollute streams, lakes and other bodies of water.

To determine how much nitrogen or phosphorus manure contains, farmers can send samples to a laboratory for analysis, but that takes time and money. And they usually send only one sample from the large pit into which they flush their manure. According to Reeves, a one-sample analysis can’t reflect the nutrient levels that often vary throughout a manure pit.

The prototype analyzer passes invisible, near-infrared light through filters onto about two tablespoons of manure placed in a small cup. The amount of light reflected back allows a filter spectrometer to quantify both the nitrogen and water content. Manure samples require no preparation or chemicals, and the analysis takes about a minute.

Having access to an accurate, inexpensive manure analyzer will become even more important to farmers if nutrient-management regulations tighten further. The prototype analyzer is a 15-inch cube that weighs about 20 pounds. Reeves plans to make it even smaller—about the size of a shoebox and weighing around 5 pounds.

ThePoultrySite News Desk